The calorimeter is now a common thing for us to measure. However, in the course of use, the calorimeter accidentally presents a problem of leakage. What should be done when the equivalent heat meter leaks?

Calorimeter leak:

1. Fill the air inlet and outlet, remove the oxidation warhead, remove the check valve, remove the dirt, replace the small sealing ring with a size of 6*1.9 (if no deformation, aging, no change).

The calorimeter is now a commonly used measure, but in the course of use, the calorimeter accidentally leaks. What should be done when the equivalent heat meter leaks?

2. O-ring seal (60 * 5.7) at the leak, remove the oxygen bomb cap, remove the O-ring and the cone, remove dirt, replace the 60*5.7 specification O-ring (if no deformation , aging, can not change), oxygenation must tighten the oxygen bomb cover.

3. The white insulating sleeve leaks, removes the oxygen warhead, removes the white insulating sleeve (upper and lower two), removes the dirt (if it is cracked, it needs to be replaced with a new one), and the sulfur analyzer can be reinstalled. .

4. The air leakage between the oxygen bomb cover and the cartridge can be tightened after the dirt has been removed. If it still leaks, it will probably take a long time to work. The thread wears too sharp and must be capped or scrapped.