The vault door is a special protection facility. As early as last century, this product has already existed, but at that time this facility was mainly used for the storage of valuable items in the national unit. Nowadays, with the change of times, this product Gradually began to be used in private companies and private luxury homes, but because of its particularity, there are not many customers who know about this product. This leads to the difficulty in purchasing and daily use. It requires continuous learning. Accumulation of experience can gradually understand this product and bear in mind. For more information on the process and pricing of the vault gate password, please click {Contact Us}
Today's small series to introduce to everyone is the use of the vault door lock, in fact, this is not very difficult, so we do not have too much pressure, when it comes to the vault door lock, in fact, everyone is not unfamiliar, because this Locked in the safe also has applications, it is similar to the use of password locks on the safe, but not much nonsense, the following Xiaobian to give you a detailed introduction again.
The door code is (locked),,,; (latch),,,;
One, with the original factory secret (50) open method:
Rotate the cipher dial counterclockwise so that the number (50) is "turned on" four times and aligned exactly with the "opening mark" on the fifth time. Then rotate the cymbal dial clockwise until it stops and the lock is opened.
Second, the pre-set password (such as 10 20 30 40) open method:
1. Turn the dial clockwise so that after the first passcode (10) has passed the “opening mark†four times, continue to slowly rotate the dial clockwise, and make the first passcode on the fifth pass (10 ) Exactly aligned with the "opening mark".
2. Then turn the dial counterclockwise to make the second password (20) go through the “opening mark†three times, then continue to rotate the dial slowly in a counterclockwise direction, and make the second password (20) in the fourth time. Align exactly with the "open" mark.
3. Then slowly turn the dial clockwise to make the third password (30) go through the “open flag†twice, then continue to slowly rotate the dial clockwise, and make the third password for the third time. (30) Exactly aligned with the "opening mark".
4. Then turn the dial counterclockwise so that the fourth code (40) passes through the “open flag†once, and then continue to slowly rotate the dial counterclockwise, and the second code (40) is used for the second time. Align exactly with the "open" mark.
5. Turn the lock dial clockwise until it stops and the lock is opened.
Note: When turning on the code lock, you should slowly turn the dial. If the required password exceeds the opening mark, you must not turn to set it up. You must open the code lock again in the opening sequence.
About the use of the vault door lock code Xiaobian introduced here, hope that through Xiaobian introduction, we can easily solve the problem of password opening.
Convertible Soft Top For Isuzu
Convertible Soft Roof,Isuzu Convertible Soft Top,Convertible Roof Replacement,Convertible Soft Top For Isuzu
Wenzhou ShengMu Trading Co., Ltd. , https://www.smatuoparts.com