Label cut and fold machine
* Machine can be cut & fold woven and printed label materials
Working speed
0~200 /min
Electric
Power
2.4kw
Voltage
220~240V, 50Hz or 60Hz
Gross weight
420kgs
Dimension
L X W X H=148x108x145cm
Automatic label Cutting and Folding Training :
Warranty:
Special label Cutting and Folding:
NOTE:
Service contact: Portable Gas Stove,Gas Burner,Outdoor Burner,Burners For Industrial Stove Ningbo Best Channel Import & Export Co., Ltd. , https://www.nbbtc-metal.com
* Label base material can be woven/printed, satin ribbon tape, cloth tape, nylon label, adhesive tape and etc.
* Label Cutting method can be hot or cold cut. Ultrasonic cutting is optional.
* It is suitable for label end fold, mitre fold, dissymmetry fold, centre fold, envelop fold and piece cut.
* Machine is easy to operate and has super performance.
* It is designed especially for with soft labels
* Fast and smooth operate, speed adjustable
* Equipped with a photo electronic fault eliminator that can reduce defective cutting and folding to the lowest possible.
* Easy to change /adjust tooling according to requirements.
Label Cut and Fold Size Range:
end folding centre folding Mitre folding
dissymmetry fold envelop fold
1. Customers are welcome to visit our company and train operators in our workshop;
2. The machine will be shipped completely with exporting wood case; With proper machine quantity, we can arrange engineer to go to customer side for label cutting / folding operation training.
1. Machine warrantee term is 12 month after shipment;
2. With warranty, We will arrange free part replacement by courier to customer. the machine shall be operate under normal procedure and routine maintenance.
1. Welcome to contact us for special label cut and fold development. Our engineer will try best to give solution based on standard tooling and config.
2. We will develop non-standard tooling for special label cut and fold.
1. Label cutting and folding machine with many mechanic gear and guide. the parts will need machine oil or grease lubrication. Operator shall keep routine lubrication every day, before start the machine.
2. Machine has many heating parts. Operator shall be carefully read operation guide before label cutting and folding.
3. Stop machine for checking if met any abnormal. take pictures and contact us for trouble shooting.
Mr.Song jinwei
Mobile: +86-15961782150
Skype: songjinwei