S&A CW-5300 industrial water chiller for laser projector
As a rapidly developed industry, laser projector
has been mainly used in cinemas and outdoor projection display due to
the utilization of semiconductor laser imaging principle.
Regarding the cooling of laser projector, it`s not rare to use
S&A water chiller. Just several months ago, S&A providedCW-6100
water chiller with 4200W cooling capacity and CW-6300 water chillerwith 8500W cooling capacity to President Zeng (a customer engaged in laser projector).
Now President Jiang, a partner of Mr. Zeng comes to us. He also wants
S&A to recommend a proper water chiller to cool their laser
projector. According to the data provided by Mr. Jiang this time,
S&A recommends CW-5300 water chiller with up to 1800W cooling
capacity to him.
Thank you so much for your support and trust in S&A. Starting
from Jan. 2016, the warranty period of S&A water chiller has been
extended to 2 years as a guarantee for your confidence in us.
CW-5300 technical parameter: http://Products/ChillerCW53001800Wco.html
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
Stereo Light Curing Molding - Sla STEREO LIGHT CURING MOLDING - SLA Sla,Sla 3D Printing Service,Sla Printing Service,Sla Rapid Prototyping Ningbo Rongna Technology Co.,Ltd , https://www.machiningcustom.com
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.