Nowadays, automotive tires are not the same single style as before. They have a wide variety of shapes and performances, and they have been injected with various cutting-edge black technologies.

Tyres are the most important parts of automobiles that are easily overlooked. Their impact on the acceleration, comfort, and handling of automobiles is very obvious, and this has also contributed to the rapid development of the tire industry. Today, automotive tires are no longer the kind A single style, a variety of shapes, performance has also been significantly improved, and was injected into a variety of cutting-edge black technology.

NO.10 IntelliGrip concept tire

IntelliGrip concept tires are connected to the vehicle control system. Its latest sensing technology and specially designed tread pattern can sense complex road and weather conditions to improve driving safety and driving performance. Advanced active wear technology can help tire and vehicle conditions. In addition, when the tire senses a slippery surface, it can immediately tell the driving system that the car will adjust its speed accordingly.

NO.9 Continental tread depth automatic reading tire

Continental Tire has previously released an automatic tire tread depth reading technology. By embedding the tire sensor, if the tread pattern depth is lower than the minimum value set by the system, the onboard electronic system will immediately issue a reminder to replace the tire, and the driver can also Tire depth data can be seen on the dashboard of the car at any time, so that it can be replaced in time when the depth of the remaining tread pattern is not enough.

NO.8 Boostrac tires

Boostrac has hexagonal blocks that give the vehicle enhanced traction in steep, rough road conditions such as deserts and mountain roads. Boostrac has a modular design throughout the tread and 120 tread blocks. It also has The structural transformation function enables its tread pattern to be converted from a suitable sandy road surface into a suitable pavement surface, further expanding its scope of use.

NO.7 Bridgestone Air Free Concept Second Generation Non-Inflatable Tire

Bridgestone's Air Free Concept's second-generation non-pneumatic tires support weight through specially shaped spokes that radiate from the side of the tire. They have the advantage of eliminating the need for air-filling and saving maintenance, not to mention puncturing. This tire is recyclable, low roll resistance, safe and environmentally friendly. Its carrying capacity reaches 410 kilograms and can withstand speeds of up to 60km/h.

NO.6 Michelin Selfseal Tire

Michelin Selfseal self-repairing tires can be self-repaired in a timely and permanent manner when they are drilled with a nail less than 6 mm in diameter, and no manual repair is required. A related person stated that it is only necessary to remove the nails that are stuck and do not worry about any effect on the self-healing function, and the tires can continue to work normally. And in terms of performance, tires using this technology have almost no difference from ordinary tires. In addition, the use of this technology does not affect the appearance of the tire, which can have exactly the same appearance as a normal tire.

NO.5 Connaught retractable spike winter tire

Nuoji's retractable studded winter tires can be used to control the telescopic nails attached to the crown, which can meet the driving needs of snow and ice or in a normal environment.

NO.4 Honeycomb tire

This tire was launched by the Polymer Research Center in Madison, Wisconsin, and is primarily used on US military vehicles. It includes solid casings and honeycomb casings. The tire is made of rubber and tightly hooped on the periphery of the honeycomb casing. The honeycomb columnar structure has a hexagonal cross section. This structural design can improve the wheel strength while ensuring the damping performance.

NO.3 BHO3 concept tire

At the 2015 Geneva Motor Show, Goodyear introduced a BHO3 concept tire with power generation capabilities that collects and converts the heat generated during tire rolling through internal materials into electrical energy. In addition, the new concept of the internal structure can also optimize the tire's power generation capacity and reduce rolling resistance. With the increasing demand for electric vehicles in the global market, this technology is expected to make a significant contribution to solving the problems in the future traffic field.

NO.2 Michelin Visionary Concept Tire

Michelin has recently released a non-inflatable concept tire of Visionary Concept, which uses 3D printing technology. The entire tire uses a honeycomb structure and is a form that mimics the natural growth process of natural plants, minerals and even animals. Tires are made from a variety of biodegradable recycled materials and can be completely recycled after disposal, while the service life of the printed tread is comparable to that of the vehicle.

NO.1 Eagle-360 spherical concept tire

The Eagle-360 spherical concept tire is a relatively advanced tire. The spherical design supports 360-degree directional steering and magnetic suspension technology. In addition, this tire also has a mobile Internet function, can be used to feedback the road surface and weather conditions to the vehicle control system through an embedded sensor, and shared to other vehicles around to improve driving safety, and its tread adopts bionic design to imitate the shape of brain coral. , Can be as flexible as a sponge, so as to change the hardness and hardness of the tire, to adapt to a variety of different road conditions.

Lumbar Cushion

Lumbar Cushion,Lumbar Support Pillow,Lumbar Support For Car,Back Support For Car Seat

Ningbo Yonghai Auto Products Co., Ltd. , https://www.nbyonghai-manufacturer.com