12" Deep Well/Borehole Submersible Electric Water Pump

Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Immersion Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Transport Package: Export Wooden Case/Carton
Origin: China
Position of Pump Shaft: Vertical Pump
Pump Casing Combined: Immersion Pump
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
Transport Package: Export Wooden Case/Carton
Origin: China
Application of 12" Deep Well Submersible Turbine Pump
This kind of submersible pump is suitable for farm irrigation, sprinkling, fountain, Rainwater Recycling System, mining drainage, rig cooling system, emergency rescue and disaster relief, urban water supply, enterprises and government institutions water lifting projects. This product is low noise, high efficiency and energy saving

Technical parameter of 12" Deep Well Submersible Turbine Pump
Max. outer diameter:281mm;  outlet diameter: DN150
Outlet connection parameter: 8 threaded studs M16×65, bolts center distance:210mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter: 242mm, inter diameter: 150mm, thickness: 20mm) consistent to the outlet.


12


Medium range of 12" Deep Well Submersible Turbine Pump
1. Clean water, chilled water / cooling water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.


12


Motor Parameter of 12" Deep Well Submersible Turbine Pump
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8

Power source of 12" Deep Well Submersible Turbine Pump
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.


12


Materials of 12" Deep Well Submersible Turbine Pump
Impeller: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump bowl: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13,3Cr13, (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber

Advantages of 10" Deep Well Submersible Turbine Pump
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ42mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.

Supplys scope
Submersible pump unit
(including the body and motor), built-in check valve, 1 flange matching with outlet, 8 threaded studs 16×65, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.

12



Friendly reminder: 
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.



12


  Application of 12" Deep Well Submersible Turbine Pump
This kind of submersible pump is suitable for farm irrigation, sprinkling, fountain, Rainwater Recycling System, mining drainage, rig cooling system, emergency rescue and disaster relief, urban water supply, enterprises and government institutions water lifting projects. This product is low noise, high efficiency and energy saving

Technical parameter of 12" Deep Well Submersible Turbine Pump
Max. outer diameter:281mm;  outlet diameter: DN150
Outlet connection parameter: 8 threaded studs M16×65, bolts center distance:210mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter: 242mm, inter diameter: 150mm, thickness: 20mm) consistent to the outlet.


12


Medium range of 12" Deep Well Submersible Turbine Pump
1. Clean water, chilled water / cooling water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.


12


Motor Parameter of 12" Deep Well Submersible Turbine Pump
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8

Power source of 12" Deep Well Submersible Turbine Pump
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.


12


Materials of 12" Deep Well Submersible Turbine Pump
Impeller: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump bowl: Cast iron, or tin bronze, SS304/316/316L, Duplex S.S, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13,3Cr13, (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber

Advantages of 10" Deep Well Submersible Turbine Pump
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ42mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.

Supplys scope
Submersible pump unit
(including the body and motor), built-in check valve, 1 flange matching with outlet, 8 threaded studs 16×65, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.

12



Friendly reminder: 
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.



12


 

Vertical Glass Washing Machine

Vertical Glass Washing Machine include 3 section:feeding section,washing and drying section and light check section or Tilting table.Titlting table used to unload the jumbo glass.Machine can wash 3-19mm glass.We have 1800*2500mm,2000*2500mm,.2500*3500mm and 3300*6000mm model

Vertical glass washing machine are all made of high-quality stainless steel. It is divided into two stages of washin and drying. It is composed of conveying roller table, cylinder type nylon brush and driving device, water spray pipe and water supply system, wiper plate, air filter and noise elimination device.

Three pairs of cylindrical brushes are driven by three asynchronous motors independently. One and two pairs of brushes are pre-washed. The third pair of brushes can be cleaned with deionized water and sprayed with deionized water on glass (three brushes and four dries, optional for water treatment). High pressure water nozzle can be disassembled for cleaning and easy maintenance.


Insulating Glass Washing And Drying,Low - E Glass Washing Machine,Glass Washing With Tilting Table,Washing Machine For Coating Glass

JINAN WEILI MACHINE CO LTD , https://www.wlglassmachine.com