During the driving process , many novices are afraid of the car. Especially when the car is on a narrow road, the novice tends to feel nervous. After a rush, there will be flameouts, stoppages, and even the two cars scratching and colliding with each other. , Or touch the roadside non-motor vehicles, pedestrians and roadside isolation facilities.

Experienced aerial vehicles and old drivers are recruiting strokes. In order to avoid the above situations, the novice must psychologically overcome the nervous and scared feelings, and easily face the car. The correct car must be prepared in advance to avoid the mentality of the car. Panic and operational hurry.

To do this, you will want to see two counts and three slows before your vehicle: At first glance, you will see the model, speed, and loading of the car, the width and solid condition of the road ahead, the pedestrians and vehicles along the road, and the on-street parking. And obstacles, etc.; second calculation, through the observation and comparison, to estimate the approximate location of the two vehicles at the time of intersection, the road situation, in order to leave a suitable horizontal safety interval; three slow, that is, when the car will slow down, approaching Poor conditions in the meeting should be to control the speed, not blindly meet, if necessary, should be the first stop. In addition, the car will also pay attention to the rules of the transfer, and timely and reasonable to allow line. At night there is no street lighting or poor lighting on the road, will When driving the vehicle, switch off the high beam and switch to the low beam.

Medical Slide Blister Packaging

Slide Blister pack

Slide blister pack are used on the most products ,such as cosmetic ,medical products,kids toys etc.It has hangable hole on the top of the packaging ,and design with paper cards ,the items are displayed on the front in order to allow buyers to better judge.The valuse of the item and unique desgn style of the item are also the advabtages and benefits of the card.

It is a type of blister packaging ,The three sides of the slide blister pack need to be folded to the back with the folding machine ,so that in the next packaging process,the cards is inserted into the folding to form slide blister pack .

Slide blister pack is the edge of the formed blister products which is heated by the folding machine and the flanging machine has three folding edges and sometimes it has four folding edges.After these folding edges are produced,they will be inserted into the back,paper cards,as known as blister cards.

blister cards, blister pack cards , slide blister pack

Shenzhen Stardeal Industrial Co.,Ltd , https://www.plasticblisterpacks.com