Industrial Seawater Purifier Reverse Osmosis Water Treatment Equipment
A)Product Profile Model WY-SW-72 Water Yield 72m³/d Desalination Rate ≥98% Output Water Saltness ≤500mg/L Operation Pressure <6.5Mp Voltage 110V~450V ; 50Hz,60Hz Power 20KW Inlet Water Temp Suggest 5~45°C Working Environment Temp 0~45°C Working Environment Air Humidity 20%~90% Main Material Stainless Steel Protection Level IP54 Size 20 feet container Life Span Control System Automatic / Manual Customized ISO9001,CCS Warranty 2 Years Customized Available Â
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com
Â
Industrial seawater purifier reverse osmosis water treatment equipment is professionally used in freighter,tanker,drilling platform,island and so on.This kind of equipment will open drain valve automatically to discharge water when the TDS of production water exceed standard value,which provide accurate value.Â
15 Years
B)Process Info about Industrial seawater purifier reverse osmosis water treatment equipment
B1)Raw water: Seawater.
B2)Feed pump:Â equipped with a stainless steel pump, to provide sufficient pressure for subsequent filtration.
B3)Multimedia filter:Â mainly remove the mud, suspended solids and large particles in the water.
B4)Precision filter:Â further filtration, protection of reverse osmosis membrane.
B5)High-pressure pump:Â provide enough pressure for reverse osmosis system.
B6)RO system:Â the core part of water equipment, almost all soluble salt, colloid, organics will be removed.
B7)Rinse tank: to protect the membrane system without polluted by using chemical agent
C)Main Features of Industrial seawater purifier reverse osmosis water treatment equipment
C1)The most advanced RO system and membrane component;
C2)Efficient energy recovery technology;
C3)Adoption of high-quality safety pressure relief device & observation system;
C4)Stable operation & high-quality producing water.
D)Packaging & Shipping
D1)Packaging
Industrial seawater purifier reverse osmosis water treatment equipment is with international standard export package.
D2)Shipping
We will choose the most suitable shipping mode according cistomers' need.
E)Company Information
   E1)Company Profile
   Zhuhai Wangyang Water Treatment Equipment Co,.Ltd. is a high-tech enterprise with integration of scientific research,new product development,production,sales and installation.
   We have specialized devices respectively for sea water,brackish water,pure water,EDI hyper pure water,reclaimed-water recycling,etc.Our product is widely used in marine drilling platform,ocean going vessel,electroplating metallurgy,chemical industry,electric power,medicine trade and so on.With professional technology and high quality,we've got ISO9001 and CCS for our product,and we'll always persist in product improvement.
   We adhere to our principle "Customer First,Quality Service,Excellent Quality",and strive to become a long-term and outstanding partner both at home and abroad.
   E2)Attending Exhibitions
F)Our Services
   F1)Installation & CommissioningÂ
   As the supplier,we have the responsibility to complete the installation & commissioning for customers before shipment.For customers need,we're available to finish that in customers' requested place.
   F2)Training
   We will provide clients technical training,which includes equipment structure & maintenance, control & operation. In this way, the technicians of customers can grasp relevant skills after training.
   F3)Quality Assurance & After-sales
   Equipment mechanical part is given total quality assurance within two years from the equipment installation and commissioning completed acceptance.During the warranty period,our company will arrange technologist to call you and ask about the equipment using situation very quarter.Consumable materials and vulnerable parts which are normal wear and tear are not within the warranty.Outside the quality assurance period,we can also provide comprehensive technical support and maintenance services for customer.
G)FAQ
Q1: Why choose us?
A:1)We have sophisticated experience and professional knowledge & technology;
  2)Both OEM and ODM orders are available;
  3)We offer high-quality product with competitive price;
  4) We offer 2-year-warranty and good after-sales service.
Q2: Are you manufacturing company or trading company?
A:We're a professional manufacturer for water treatment equipment.And always welcome to visit our factory.Â
Q3: How should I select the plant?
A:It depends on your requested parameters,such as raw water source,water quality,water yield,voltage,etc.
Q4: What's your suggest for maintenance?
A: 1)check all circuit whether damaged;
  2)check valve whether malfunctioning phenomenon;
  3)check all pipes for leaks;Â
  4)If long time no use,you should add protective solution to protect the reverse osmosis:
  4.1)Open inlet which in the front of the high-pressure pump (see illustration), make well the protective solution in the water tank ,then connect with the tank via pipe , start the water tank pump, when the protective solution full filled with reverse osmosis membrane group, turn off the water tank pump, close the inlet. Meanwhile  every day to observe, such as protection fluid leakage situation, should replenish the above step.
  4.2)Before equipment start-up , protective solution should be clear up.
Q5: Could you offer some info about troubleshooting?
A:Our pleasure in doing that.
  1)high-pressure pump:
   Each work 200 hours to inspect, pressure whether normal, whether the crankcase short of oil, the pump whether abnormal and other tests, such as abnormal working, in accordance with the manufacturers instructions for maintenance. If do not have maintenance skills, please timely contact with the manufacturer, we will maintenance for client.
  2)booster pump:
Maintenance, inspection, refer to the high-pressure pump, the specific details, see the lift pump manual requirements. Equipment failure, if you are able to maintenance and repair, the manufacturer can provide technical support. If do not have skills to repair, made it clear that the cause of the malfunction and fault coverage, please contact the manufacturer.
Q6: What's your payment term?
A:PayPal,T/T,Western Union,L/C available;40% deposit before manufacturing,and the rest should be paid before shipment.
H)Contact
Â
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.