PE PP film Recycling Machine for making recycled granules pellets
The ACS series compacting and pelletizing system combines function of crushing, compacting, plasticization and pelletizing into one line, applied in the plastics recycling and pelletizing process. ACS system is a reliable and efficiency solution for plastic film, raffia, filament, bags, woven bags and foaming materials re-pelletizing.
Final products produced by ACS system are in the form of pellets/ granules, which can be directly put into the production line for film blowing, pipe extrusion and plastic injection, etc.
Belt conveyor, Compactor, Single screw extruder, Screen changer, Cutting/Pelletizing device, Water cooling unit, Dewatering section, Air conveying unit, Silo, Electric control cabinet.
Output Range
160kg/h-1200kg/h
Feeding Device
Belt conveyor (standard), Rolls hauling off device (Optional)
Metal detector, rolls hauling off device, micro feeder for masterbatch, additives, chiller, etc.
Delivery Time
Usually 60 working days.
Warranty
13 months from the date of B/L.
Technical Service
Project design, suggestion on factory construction, installation and commissioning.
Working process of ACS Series compacting and pelletizing system 1. Feeding:as standard design, plastic scraps such as film, filament, raffia are conveyed into the compacting room by the belt conveyor. Roll hauling off device as optional feeding method. With ABB inverter. Feeding speed is fully automatic based on how full the compactor's room is. Metal detector can be combined with belt conveyor, and can interlock with control system, to warn and stop the system, in case that metal is found in feeding section.
2. Crushing and compacting:the rotatory blades of compactor will cut up incoming scraps. Frictional heat which caused by high speed rotatory blades will heat and make scraps shrink just below their agglomerating point. Optimal designed guide structure compacts the material and directs it into extruder screw. Crushing, drying and compacting the material enables a fast and stable feeding from the compactor directly into the extruder.
3. Plasticization and degassing: A specialized single screw extruder applied to gently melt the pre-compacted material. The plastic scraps will be well melted, plasticized in a 36D processing section. With double-zone vacuum degassing system, volatiles such as low molecular and moisture will be removed efficiently, especially suitable for heavy printed film and material with some water content.
4. Melt filtration:a regular single-plate/ piston double-station screen changer or non-stop double-plate/ piston four-station can be installed on head of extruder to present significant filtration performance. The requirements on the filter technology depend heavily on the quality of the input material as well as the planned use of granules.
5. Pelletizing: die-face water-ring pelletizing system is the standard granulating method in ACS system. Self-adjusting pelletizing head for the best granulate quality and long uptime thanks to consistently correct blades pressure. Rotary speed of rotatory blades is automatic based on melt extruding pressure. Advanced dewatering vibration sieve combining with horizontal-type centrifugal dewatering present high performance dried pellets.
Main technical parameter:
Model
Data of compactor
Data of single screw extruder
Output capacity(kg/h)
Efficiency volume(Liter)
Motor power(Kw)
Diameter of screw(mm)
L/D
Motor power(Kw)
ACS300/80
300
37
80
36
45/55
160-220
ACS500/100
500
55
100
36
90/110
300-380
ACS800/120
800
90
120
36
132
450-480
ACS1000/140
1000
110
140
36
160/185
500-650
ACS1200/160
1200
132
160
34
220/250
800-1000
ACS1400/180
1400
315
180
34
315
1000-1200
 Advantages of ACS compacting and pelletizing system 1.One-step recycling line with compactor integrated. 2.Higher efficiency feeding, suitable to film, filament, raffia, foaming materials. 3.Higher output and lower energy consumption.
We offer battery operated or rechargeable led flameless pillar candles in red, white or other colors. There are many sizes of electric pillar candles for your choice. We can make paraffin wax shell or plastic shell led pillar candles. The advantage of the paraffin wax shell flameless pillar candle is that it is realistic and looks like a real candle. The electric pillar candle with plastic shell has the advantage of being waterproof, and the appearance is not easily damaged. Electronic pillar candle is mainly used in interior decoration, such as homes, weddings, restaurants, hotels, etc.
Led Pillar Candles, Flameless Pillar Candles, Electric Pillar Candles