plastic recycling extrusion  machine/PP PE HDPE Granulating Plastic Single Screw Extruder,This is mainly used for PP PE film and rigid or hard crushed material is also possible, it is specially designed for feeding squeezed material, waste dirty material after washed and dried.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

More machine photoes
Feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage of machine(After feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) 
Vacuum degassing on the first stage

Material come out from the die( Normally we use 13,15,17,19,21 holes on the die)

Machine under producting

Pameter of such kinds of machine

 

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

plastic recycling extrusion  machine/PP PE HDPE Granulating Plastic Single Screw Extruder,This is mainly used for PP PE film and rigid or hard crushed material is also possible, it is specially designed for feeding squeezed material, waste dirty material after washed and dried.

Two stage machine with two screen changer, so that it can fliter much more impurity. Meanwhile the machine with one vacuum degassing and one natural degassing, then the final pellets will be more beautiful. The machine is with high performance and high efficiency, 

Screw is designed with differennt type for different, and the heater also can use Cost Aluminium, cost copper, alloy, keramic or others.

Side feeder with mixer, material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder
Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
3. High capacity: the capacity of the machine is about 300kg/h
4. Material come out more stably: material go through from the first stage to the second stage, with two screen changer, much more impurity will be filterd and the material come out from the die won't broken down.
5. Beautiful pellets: two degassing system, no air in the pellets.
6. The machine wih long life.

More machine photoes
Feeder(material feeder into the extruder, meanwhile the mixer will be running all the time, the material won't stick together and can be send into the extruder)

The first stage of machine(After feeder, the material will be send to the first stage, with extrusion and first screen changer, the material will go to the second stage) 
Vacuum degassing on the first stage

Material come out from the die( Normally we use 13,15,17,19,21 holes on the die)

Machine under producting

Pameter of such kinds of machine

 

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

Inflatable Baby Swim Seat

The baby grows up day by day, and likes swimming every day. In order to continue the project of baby swimming, the baby's head can also be raised at that time, and he no longer likes to be strangled by the neck. The baby also needs a wider field of vision. The depth of the baby swimming pool cannot reach the purpose of the baby's swimming (the baby's feet touch the bottom of the pool). If you want to swim in the original baby swimming pool, you must increase the baby's swimming height or increase the depth of the pool. The neck is moved to the base of the thigh, which increases the height of the baby's swimming. In order to solve these two problems, the Inflatable Baby Swim Seat was created.

The Inflatable Baby Swim Seat has multiple independent airbags, and there is an anti-leakage device in the air nozzle, which is safe and reliable. The swimming ring is carefully designed, made and comfortable to wear according to the characteristics of the baby's thigh. Proper use can prolong the use time.

Baby Swimming Float, Inflatable Baby Pool Float Ring, Baby Float, Swimming Pool Toddler Floaties, Inflatable Baby Swim Float

Lixin Outdoor Product Co., Ltd , https://www.jmairfuniture.com