Plastic Square Oval Laundry Basket Mould

Model NO.: ST2
Runner: Cold Runner
Design Software: UG
Installation: Fixed
Certification: CE
Standard: DME
Customized: Customized
Trademark: Sautau
Transport Package: Wooden Pallet
Specification: middle size
Origin: Huangyan China
HS Code: 84807190

Sautau Company New Molds making department

Product Description

Plastic Laundry Basket Mould Specification:

Plastic Laundry Basket Mould,shopping basket mould Injection Mould,Plastic Moulding,Injection Moulding,Plastic Mould

Laundry Basket Mould Name:

Plastic Laundry Basket Mould

Laundry Basket Mould Size:

60L

Laundry Basket Mould cavity:

1 cavity

Laundry Basket Mould Size:

800x800x980mm

Suitable machine:

1600T injection machine

Laundry Basket Mould Steel:

2738,P20

Laundry Basket Mould life

800K

Runner system

1 point hot runner gate,cold runner

Ejection system

Inclined ejecting block

Laundry Basket Mould running:

Full automaticity

Laundry Basket Mould features:

above mould has 4 slides in the cavity for better product appearance

Injection cycle time: 

45 seconds

Laundry Basket Mould normally delivery time:

65 days

Company Profile
Sautau Mould is the new concept in mould making in China. After more than 20 years of experience, Sautau faces the new challenge of creating better and more reliable partnerships around the world. It was in 2013 that we began to expand our business and improve our service.We have enough experience for making Plastic homeware mold such as Plastic basket mold,plastic container mould,plastic stackable bowls mold.Plastic industrial mould such as plastic crate mould,plastic pallet mould,plastic paint bucket,plastic bobbin mould,plastic workshop chiller mould.Plastic Chair Mould,Plastic Table Mould,Pet Preform mould,Pet Blowing Molds,Motor parts mould,automobile parts mould and so on.

Research&Designing

Plastic Square Oval Laundry Basket MouldSimulation Plastic Flow: Simulation of plastic melt flow. To optimize and injection mould design of plastic parts, potentially reducing parts defects, improve the molding process.
Simulation Gating System: The cold/hot runner and gate configuration of modeling and Optimization. Improvement of parts surface, reduce warping of parts and cycle furthest.
Simulation Cooling: Improving the efficiency of the cooling system, reduce warping of parts furthest, so that the surface is smooth, and reduced cycle times.
Simulation Shrinkage and Warping: Evaluation and injection mould design of plastic parts in order to control shrinkage and warping.
Professional Forming Process: On a wide range of injection moulding processes and specialized application process flow simulation, especially in gas-assisted injection mould. For example: gas rattan chair.

Workshop shows
This is new molds making workshop belongs to Sautau Company

Plastic Square Oval Laundry Basket Mould

Delivery States
This is export standard package pallet for easy moving

Plastic Square Oval Laundry Basket Mould

cooling mold Chiller

The chiller is a cooling water equipment that can provide constant temperature, constant flow and constant pressure. The industrial water chiller can always output ice water that is lower than the ambient temperature. It can be used wherever cooling is needed, either directly or indirectly. The chiller can be used to cool the injection mold and improve the quality of plastic products; Vacuum coating cooling, control the temperature of vacuum coating machine; Food industry cooling, rapid cooling processing; Chemical industry, effectively control the temperature of chemicals; Building cooling, rapid cooling and condensation of concrete, etc. Water chillers are widely used.



Water chillers can be divided into industrial water chiller, screw water chiller, electroplating water chiller, oxidation water chiller, laser water chiller, coating water chiller, wave soldering water chiller, reflow soldering water chiller, exposure machine water chiller, developer water chiller, ultrasonic water chiller, extruder water chiller, high-frequency quenching water chiller, Injection Molding Machine water chiller, electrophoresis paint water chiller Pharmaceutical special water chiller, food special water chiller, stainless steel water chiller, circuit board water chiller, plastic suction machine special water chiller, chemical water chiller, coating water chiller. According to working conditions, it can also be divided into air-cooled water chiller, water-cooled water chiller, low-temperature water chiller, thermostatic water chiller, etc



Energy saving function of water chiller:



The water chiller is a kind of refrigeration equipment that cools water and recycles it. The cooling water temperature can be adjusted automatically according to the requirements, almost without water consumption. Long-term use can save a lot of water. Therefore, compared with the mode of using tap water discharge to cool the equipment, the industrial water chiller is an ideal equipment that can quickly achieve the desired cooling effect and save energy.



About the function of the chiller, I will introduce it here today. Chillers play an important role in industrial production. Enterprises use chillers to improve production efficiency, ensure product quality and increase profits.



1. Regularly check whether the voltage and electric flow of the water-cooled chiller are stable, and whether the compressor operates normally. If it is a semi-closed compressor, regularly check the oil volume, which should be more than 2/3 of the window. When the water-cooled chiller works normally, the voltage is 380V and the current is within the range of 11A-15A.





2. Regularly check whether the refrigerant of the water-cooled water chiller has leakage: it can be determined by referring to the parameters displayed on the high and low pressure gauge on the front panel of the host. According to the temperature change of air temperature (winter and summer), the pressure display of the water chiller is also different. When the water chiller works normally, the high pressure display is 11-17kg, and the low pressure display is 3.5kg-5kg, which are normal.



3. Check whether the cooling water system of the water-cooled water chiller is normal, whether the fan and sprinkling shaft of the cooling water tower are in good operation, and whether the make-up water of the built-in water tank of the water-cooled water chiller is normal. The water-cooled chiller should be replaced with new water once every three months. If it cannot be replaced, please add rust remover.



4. All industrial water chillers should be cleaned once a year when they are used for six months. The main cleaning parts include cooling water tower, cooling water pipe and condenser to ensure better cooling effect.



5. When the water-cooled chiller is not used for a long time, the circuit switches such as the main power supply of the water pump, compressor and Cooling Tower should be turned off in time. The water-cooled water chiller needs to be connected with the cooling water tower and the circulating water pump to achieve the cooling effect. In order to ensure the quality of the circulating water, it can be considered to install a Y-type filter at the water source and add algaecide and scale remover to the cooling water tower to prevent impurities from entering the pipeline and affecting the operation of the unit.

Cooling Mold Chiller,Injection Molding Chiller,Chiller Used In Injection Molding,Cooling Mold Chiller

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com