Tongliao Wind Power Development Area Covers Mengdong Four League City

On May 16, Inner Mongolia Huadian Tongliao Wind Power Project Preparatory Office signed a 200MW wind power project development agreement with the People's Government of Xing'an Mengkeqianqian Banner, Inner Mongolia. At this point, the Wind Power Development Zone of the Preparatory Office has achieved full coverage of the Mengdong quad-munitions city and has accumulated 5.3 million kilowatts of wind resources.

The project is located in the hilly area of ​​the Horien area in the Keyouqian Banner, with an altitude of 450 to 900 meters above sea level. The annual average wind speed in the area is about 8 meters/second, which has high development value and market prospects.

Since this year, Tongliao Wind Power has consistently adhered to the concept of creating sustainable values, carefully implemented Huadian International's "second entrepreneurial" strategy, vigorously broke through geographical development, breakthroughs in scale, and breakthroughs in the development of profitable ideas. The investment is diversified and the competition is fierce. Under the circumstance, with the goal of constructing 1 million wind power energy bases, we will accelerate the outward extension of development from the Tongliao region to the base point, start with the organizational structure, personnel strength, and multi-party cooperation, and establish three project development teams, Tongliao, Chifeng, and Hulunbeier. The open competition has selected two outstanding values ​​to enrich the early stage strengths, and through various forms such as cooperation with the government and wind power equipment manufacturers, it actively seeks for project development opportunities, implements external conditions, solves development and approval problems, and makes every effort to seize more opportunities in the Mengdong region. More quality wind resources have effectively expanded the development space.

Anti-wear Ring

Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.

Wear ring for excavator,For excavator track,For excavator accessories

Safe Seal Technology Co., Ltd. , https://www.jolseals.com