Now, in order to keep the city clean, after cleaning the rubbish, the workers are transported to a remote place using a clearing vehicle. Therefore, it is common for urban garbage trucks to remove rubbish. For consumers, in order to ensure that your vehicle can be used for a long time, you need to understand what are the common breakdowns of some garbage trucks . Then we will give you a detailed description of what are the common faults.
First, the adjustment of the vehicle's toe-in, first of all, before starting the vehicle, ensure that the tire pressure of the vehicle is normal and the length of the tie rod is adjusted. At the same time, check whether the ball of the lower arm is worn. If there is wear, it needs to be replaced. From time to time, it is necessary to check if the parts of each connection part are firm.
Second, the rear axle of the garbage truck is also within the scope of frequent inspection of the fault. When the tire rotation is difficult after discovery, first check whether the rear wheel bearing is worn or it is the rear wheel bearing. The situation of lockup occurs. When this happens, professional maintenance personnel should be found to replace it for repair.
Thirdly, it is also regular to check whether there is any abnormality in the oil path of the garbage truck and whether there is any oil spillage. When this happens, it needs to be repaired immediately to make oil leakage and seepage. Tighten the place, at the same time to check the size of the lubricant, to prevent dry burning, so as not to start the engine holding cylinder situation.
Believe that you understand this, you should have a certain degree of help, when you understand these common faults mentioned above, when your garbage truck appears the above-mentioned failures, you can calmly deal with. In addition, when you use the garbage truck , you also need to pay more attention to maintenance, so as to be able to increase its service life. The use of garbage trucks can only maintain a certain degree of cleanliness for the life we ​​live in. To truly protect the environment, we need every one of us to work hard.
Tunable Laser
CNI offer wavelength tunable Laser, the output wavelengths can be changed continuously within a certain range. Tunable lasers come with good beam quality, high stability and long life time, they are widely used in spectroscopy, photochemistry, medicine, biology, integrated optics, laser processing,etc.
Specification
Tunable Diode Laser
|
|
Tunable Wavelength Band
|
Model
|
Output Power
|
Specifical
|
|
403~407 nm
|
TUN- 403~407
|
1~30 mW
|
<0.1 nm
|
|
408~412 nm
|
TUN- 408~412
|
1~30 mW
|
<0.1 nm
|
|
448~452 nm
|
TUN- 448~452
|
1~10 mW
|
<0.1 nm
|
|
518~522 nm
|
TUN- 518~522
|
1~10 mW
|
<0.1 nm
|
|
634~643 nm
|
TUN- 634~643
|
1~10 mW
|
<0.1 nm
|
|
652~658 nm
|
TUN- 652~658
|
1~10 mW
|
<0.1 nm
|
Tunable Ti : Sapphire Laser
|
|
Tunable Wavelength Band
|
Model
|
Output Power
|
Specifical
|
|
390~408 nm
|
TUN-TiA-393~408
|
1~1000 mW
|
<2 nm
|
|
770~840 nm
|
TUN-TiN-770~840
|
1~400 mW
|
<40 pm
|
|
770~840 nm
|
TUN-Ti-770~840
|
1~1000 mW
|
<2 nm
|
|
770~840 nm
|
TUN-TiA--770~840
|
1~1300 mW
|
<2 nm
|
Tunable Infired Laser
|
|
Tunable Wavelength Band
|
Model
|
Output Power
|
Specifical
|
|
1400~1800 nm
|
TUN-W-1400~1800
|
1~2000 mW
|
<2 nm
|
|
2600~4450 nm
|
TUN-W-2600~4450
|
1~1000 mW
|
<2 nm
|
Testing data
|
|
|
Pulse width 34 ns testing at 10kHz
Ti: Sapphire Laser
|
Power stability < 3%
Ti: Sapphire Laser
|
Tunable Laser Diodes,Tunable Laser,CW Tunable Laser,Finisar Tunable Laser
Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com