What are the requirements for machine tool electrical cabinets and lines?

Including the machine body or its own various types of electrical distribution lines or distribution cabinets, the electrical switch from the machine switch to all electrical components and agencies should meet the requirements. The electrical cabinet doors should be closed tightly. There is no debris and no workpieces in the front of the door within 08m. The cabinet doors are easy to open; the electrical layout inside the cabinet is reasonable, the wiring is neat, and the numbers are clear and correct; the cabinet is clean and dry, and there is no dust accumulation. Water, oil accumulation, no sundries or electrical spare parts; protection devices such as anti-short circuit, overload, voltage loss, undervoltage, self-locking, interlock, over-current, and signal are all intact and effective; all fuse elements are matched with the load and must not be used arbitrarily Failed fuses are replaced; all electrical switches, handles are located reliably, each indicator, indicating instrument, operation button, etc. are marked clearly, and are in good condition and complete; each line has no aging, damage, and the serpentine pipe is not damaged or detached by pressure. Metal cabinets should be protected with a protective grounding and reliable connection. If there are electrical components on the cabinet door, the door should be connected to the enclosure with plastic copper conductors.

desktop mini Injection Molding Machine

Small miniature tabletop Bakelite Injection Molding Machine can be widely used in the field of thermocouple lead plastic sealing in the temperature control manufacturing industry, and can meet the special requirements of good insulation, high humidity and heat resistance.

The machine is equipped with an independent temperature detection and heating system for the mold and a cooling system for the material barrel, which can effectively control the molding speed of the finished product and the plastic control of the material in the material barrel.



The machine has high molding pressure, small size, low maintenance cost, convenient and fast operation and commissioning, low use cost, no oil pump, no high-power heating element, low noise and cleaning.



Forming pressure: 160MPa (customized according to customer requirements)

Mold closing pressure: 2-10Ton (larger, can be customized according to customer needs.)

Feeding mode: automatic/manual (customer's choice)

Hopper heating: yes/no (customer's choice)

Working voltage: 220VAC, 220V single phase (household appliances)

Overall power: 500W

Weight: 150KG

Plastic Small Injection Molding Machine,,Vertical Mini Plastic Injection Molding Machine,,Injection Molding Machine To Provide Plastic Parts,High Precision Servo Injection Molding Machine,

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com