A brief analysis of the preparation and installation of slant bed CNC lathe before operation
MH slurry pump is single stage, cantilevered, horizontal, centrifugal High Pressure Slurry Pump. The MH High Head Slurry Pump is specifically designed to combat the need to run conventional design slurry pumps at excessive speeds to generate high heads and high efficiency often required in many modern slurry pumping applications used as the filter press feeding pump, SAG Mill Discharge Slurry Pump and Wet Crusher Slurry Pump etc.Single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while still offering optimum wear life and efficiency.
Pump Features
-High chrome alloy liners provide superior abrasion resistance & erosion resistance and maximum wear life
-Large diameter, high efficiency impellers designed to meet high head requirement, maximum wear life and low operating cost
-High head & high pressure
-Discharge branch can be positioned at intervals of 45 degrees
-The pump can be installed in multi-stage high pressure operation
-Easy to maintain
Application Range:
Discharge Size:1" to 6" Slurry Transfer Pump,Filter Press Feeding Pump,Discharge Slurry Transfer Pumps,Mill Dicharge Slurry Pump SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com
The slant bed CNC lathe can be equipped with power cutter function and 8-station turret tool holder, which can meet the different needs of the processing, applicable to the processing of a variety of products, small and medium batch products; it shows its superiority to complex and high-precision parts. .
First, the oblique bed CNC lathe preparation before the trial operation 1. Oblique bed CNC lathe geometric accuracy after passing inspection, the need to clean up the machine. Use cotton cloth or silk cloth impregnated with detergent and do not use cotton yarn or gauze. The rust preventive oil or anti-rust paint that is applied to protect the guide rail surface and the processing surface when the numerically-controlled lathe is slanted is cleaned. Clean the dust on the outer surface of the machine. Apply sliding oil to each sliding surface and working surface.
2. Carefully check whether the various parts of the inclined bed CNC lathe have been oiled as required, and whether the coolant box is full of coolant. Whether the oil in the machine hydraulic station or the automatic lubrication unit reaches the position specified by the oil level indicator.
3. Check whether the switches and components in the electrical control box are normal and whether the plugged integrated circuit boards are in place.
4. The electricity starts the centralized lubrication installation, so that the lubrication parts and the lubricant road are full of lubricating oil. Prepare everything before moving parts of the machine.
Second, the oblique bed CNC lathe installation Slant bed CNC lathe placed on the foundation, should be leveled in the free state, and then evenly lock the anchor bolt. For ordinary machine tools, the level meter reading does not exceed 0.04/1000mm. For high-precision CNC machine tools, the level meter does not exceed 0.02/1000mm. When measuring the installation accuracy, it should be carried out at a constant temperature, and the measurement tool must be used after a fixed period of time. Slant bed CNC lathes should be installed to avoid forced deformation of the CNC machine. Slumber bed CNC lathes should not be easily removed when the installation of some of the machine parts, component removal may lead to an important new distribution of the CNC lathe stress, thus affecting the accuracy of CNC machine tools.
3 Capacity:16 to 1125 m /h
Head:12 to 95 m