How to quickly and effectively check the triangle belt

The triangle has two kinds of special core structure and rope core structure, which are composed of four parts: wrap cloth, top glue, tensile body and bottom glue. The tape structure of the triangle belt is easy to manufacture, tensile strength is general, and the price is low. The tapes with a wide range of special cored structures have good toughness and high strength and are suitable for high speed applications. Ordinary rubber material V-belts are generally composed of a wrapper layer, an extension layer (top glue), a strength layer (a tensile layer), and a compression layer (bottom glue).
V-belt

Everyone may feel familiar and unfamiliar with the triangle belt. It seems to have been heard, but it is impossible to tell what it is. Next we will first briefly understand how to check the triangle belt?

First, apply a vertical pressure of about 2 kg to the middle of each tape by hand. The amount of sinking is preferably 20 to 30 mm. When it is not appropriate, adjust it in time. When two or more triangular tapes need to be replaced, they must use the specified model of triangular tape, and require that each set of triangular tapes have the same degree of tightness, no new or old mixed packing or reduced number of roots, otherwise, the old and new triangular belts will be unevenly distributed. Even the old triangle does not work, affecting power transmission and shortening the life of the V-belt.

When we are in the process of use, we must strictly prevent the oil and dirt in the triangle belt, avoid contact with corrosive substances such as acids and alkalis, avoid slipping and corroding it, and finally cause premature damage. Of course, when installing the pulley, the center of the two upper pulleys must be aligned, otherwise it will cause it to work unilaterally, which will cause serious wear and tear, shorten the service life of the product, and waste the cost.

The above is a brief introduction of inspection triangle belt, we are specialized in producing this product, we are looking forward to you can go to our factory to buy our products, our product quality will certainly make you very pleasantly surprised.

Rubber Hygroscopic Agent Rubber Biocide-algaecide Agent

Actmix®CaO-80, the hygroscopic agent for rubber compounds of all kinds to prevent porosity, particularly suitable for extruded rubber compounds, such as seals in car or building, which is vulcanized in hot air, fluidized bed, salt bath and microwave device.

Actmix®CaO-80GE F200 allows:

Dust free products with a complete filtration up to 45µm, environment improver, health guard of operators.

Lower water absorption and effective guarantee of stability and activity of CaO due to pre-dispersed masterbatch.

Rubber Hygroscopic Agent,Rubber Desiccants Agent,Rubber Super Dry Pack Hygroscopic,Rubber Strong Hygroscopic

Ningbo Actmix Rubber Chemicals Co., Ltd. , https://www.actmixchemicals.com