The abnormal damage of the vehicle is often caused by improper human operation. We should maintain good driving habits during normal driving, so that a reasonable use of the car can be achieved in order to extend the service life of the swing arm garbage truck.

1, does not shift gear according to the speed

In order to save time and effort, many drivers will not change their gears in time. This will cause great damage to the engine and fuel consumption will increase. The best way is to make reasonable additions and reductions based on road conditions and speed.

2, the irrational use of the clutch

Some drivers are accustomed to putting their feet on the clutch pedal for a long time while driving the vehicle. Since the clutch is in a semi-linkage state at this time, the clutch damage is very large and should be avoided. In addition, when starting, care should be taken not to use excessive throttle, and the clutch should not be slammed into a fierce slam, as far as possible.

3, step on the brakes

It's the most likely mistake to step on the brakes when you're downhill. It's easy to overheat the brake pads and stop the car. In the usual driving, it is necessary to control the speed of the vehicle and avoid unnecessary braking. Downhill uses the engine braking force to control the vehicle speed. When braking, it is better to use the point brake method to prevent the vehicle from losing control.

4, hand on the lever when driving

Many drivers prefer to put their hands on the lever when driving. This will not only affect the safety of the car, but also cause some damage to the transmission due to the long-term transmission of the force exerted on the shift lever to the various components of the transmission.

5, traffic in the gear

When most drivers will use the gear as a means to save fuel, they neglect the safety of the vehicle and damage to the vehicle. For the more popular electronically controlled engines, it is not necessarily fuel-efficient.

6. Do not observe the instrument while driving

With the advancement of science and technology, now the instrument design of arm-type garbage trucks is getting more and more in place. Basically, the normal operation of each component can be read directly on the instrument. We should observe the instrument at any time during normal driving. If there is an abnormal signal display (the meter lamp should not be displayed during normal driving), it should be checked immediately.

Hubei Cheng Li specializes in producing all kinds of multi-functional sanitation garbage trucks, garbage truck manufacturers sales website: http:// garbage truck manufacturers sales hotline

Spring Cone Crusher
Compared with Jaw Crusher, spring Cone Crusher has the advantage of low operation costs, high productivity, easy adjustment and stable structure. Cone Crusher can be used for secondary and fine crushing of hard and medium hard mineral stone, such as iron ore, copper ore, quartz, granite, basalt and dolerite, etc. The spring safety system of spring cone crusher serves as an overloading protection system that keeps cone crusher from metal damage. The dry oil and water sealing form of safety system is adopted to make plaster powder and engine oil separate to guarantee reliable performance.

Spring Cone Crusher

Spring Cone Crusher,Hpc Cone Crusher,Pew Jaw Crusher,Pe Series Jaw Crusher

Shenyang Sanland Mining Equipment Manufacture Co., Ltd. , https://www.sanlandcrusher.com