On the 4th, the "Made in China 2025" plan is expected to be released by May or June at the latest. Some experts said that private enterprises will become the main participants in planning and participating in the business. Hewlett-Packard Group executives also expressed their position that planning will benefit companies.

According to an authoritative source, the official release date of the "Made in China 2025" plan (hereinafter referred to as "Planning") that has been reviewed by the State Council's executive meeting has been gradually approaching. It is understood that the plan is revamping the relevant content and is expected to be released by the end of May or June. Experts said that the plan is equivalent to a guide to the transformation and upgrading of domestic manufacturing in the next ten years. Since private enterprises in the domestic manufacturing industry account for the vast majority, private enterprises will become the main participants in planning and participating in the business.

Planning related content is being revised

It is understood that the plan proposes nine tasks, ten key areas, and five major projects. Among them, the nine major tasks include the enhancement of national manufacturing innovation capabilities and other ten key areas including the establishment of a new generation of information and communication technology industries, high-end CNC machine tools and robotics, bio-medicine and other five key projects including the national manufacturing innovation center, intelligent manufacturing Wait.

"After the State Council reviewed and passed, some relevant contents of the plan are being revised." Dr. An Lin, an expert of the Saidi think tank of the Ministry of Industry and Information Technology, said that it is expected that plans will be released by the end of May or June. Moreover, the interpretation of relevant policies will begin before and after May 1st. At that time, the State Council or the Ministry of China Affairs will publish a systematic interpretation of 2025 articles.

It is understood that the plan has passed the State Council executive meeting in March. On March 27, Deputy Minister of Ministry of Industry and Information Technology Su Bo stated at the briefing meeting of the State Council policy that in order to realize the goal of “Made in China 2025”, the leading group for the construction of a national manufacturing power will be established, and a “1 X” implementation plan will be established. Planning system.

Hewlett-Packard executives said that the planning includes the smart manufacturing industry. Therefore, as a supplier of automation and information technology solutions, the release of the plan will benefit the company. In fact, from the end of 2013, the Chinese Academy of Engineering proposed a "Made in China 2025" proposal to the central government. Since then, companies have been paying attention to the development of related issues. Of course, they also hope that the plan can be released as soon as possible.

Manufacturing Transformation and Upgrade Guide

According to the Ministry of Industry and Information Technology of the People's Republic of China, the "China-made 2025" plan will appear as a combination of top-level design, key industries, and other "1+10" models. Apart from transformation and upgrading, the industrialization and informationization "intensified integration of the two industries" has also been highlighted. and. The plan was prepared by the Ministry of Industry and Information Technology, together with more than 20 ministries and commissions, including the National Development and Reform Commission and the Ministry of Science and Technology, and more than 50 academicians. The core of the plan is to propose a three-year “three-step” strategy for China’s construction of a manufacturing powerhouse, with emphasis on the first ten. The year's goals and tasks were specifically deployed. An Lin said that once the plan is released, it will have a very big impact on related companies. Because the plan is not only an ordinary plan, but also a planning outline, it is equivalent to a guideline for the transformation and upgrading of domestic manufacturing in the next ten years.

An Lin further pointed out that the plan is a project system, and each special project is a system. Because each of the key areas and key directions mentioned in the plan is followed by a major project, there are a bunch of projects under major special projects, and these will be participated by the enterprises. That is, the government proposes a project and the company participates in the implementation. Moreover, some of its special projects are technological breakthroughs that must be resolved by enterprises.

Xu Honghai, dean of the Shanghai Industrial Automation Instrument Research Institute, recently stated that "China's smart manufacturing development has met with better conditions, which will be the basis for achieving the goals of the 'Made in China 2025' plan."

Hollych Group executives told reporters that in terms of technological innovation, companies have been deeply pursuing automation in the field of rail transit. The signal systems and series of products developed have obtained international safety certification, and many high-end products have been widely used in the market.

An Lin said that for the subject’s participation in the enterprise is a state-owned enterprise or a private enterprise, not mentioned in the plan. However, the vast majority of domestic manufacturing industries are private enterprises, so private enterprises should be planning to participate in the main business, and the state must especially support the technological transformation of private enterprises, and the project will adopt a mechanism for declaration and selection. For example, after public projects, companies To declare and submit bids, the government chooses from among them, so it is also fair competition. In addition, the state will also subsidize the companies selected.

In fact, under the guidance of the national policy, more and more companies are actively participating in the upgrading of the manufacturing industry. With the integration of the two forces, many companies have explored a transition path that suits their own development.

On April 16th, the Haier Visual Interconnect Factory with distinctive features of Industry 4.0 held a conference in Foshan, Guangdong Province. The first batch of washing machines with 500,000 users participating in the creation of the company was officially offline. It is understood that as the world's most advanced interconnected factory in the washing machine industry, Haier is actively exploring the transition from large-scale manufacturing to large-scale customization. In Haier's interconnection factory, not only can we customize personalized products for users, but we can also allow users to “track” production through visual production.

Midea Air-Conditioning has already carried out transformation and upgrading of automated production and manufacturing at six production bases across the country. Wu Wenxin, president of Midea Home Air Conditioning Division, revealed that in the next five years, Midea will invest 5 billion yuan in automation to upgrade the manufacturing system.

Hangzhou Zhongce Rubber Co., Ltd. recently spent more than 80 million yuan to cooperate with universities to develop MES intelligent production system, let the machine to identify the code on each tire to achieve intelligent production. After the system is enabled, 1 person can look after 25 machines.

Dongguan Longchang Toys started with toy OEM. In order to have independent intellectual property rights, Longchang Toys invested about 20 million yuan each year in equipment renewal, talent introduction and scientific research activities, forming a R&D team consisting of more than 200 technicians, of which 20 Many people have senior engineer certification. At present, the company sells its domestic products of high-quality, intelligent robots at prices up to more than 2,000 yuan.

smtplaza is majoy in supplying  Juki  smt feeder, Juki Stick Feeder, juki emboss feeder,juki 2070 feeder, juki  VIBRATION STICK FEEDER,juki smt tape feeder.With prompt, professional, friendly service at competitive prices, and wonderful warranty service. We will find virtually any part you are looking for, regardless of original manufacturer or vintage, delivered anywhere in the world .

JUKI/Zevatech SMD SMT Feeder

Juki Smt Feeder Calibration Instrument,Juki Smt Feeders,JUKI Used Machine Feeder,Juki Stick Feeder,Juki Feeder Calibrator,Juki Electronic Feeder

SMTPLAZA CO., LIMITED , http://www.smtpartsupply.com