Study on Respiration of Plants Respirometer to Plants

According to the Biology Bulletin, No. 4, 1963, No. 4, page 38, the method described in Comrade Ren Linhan’s article “Selling Tests on the Respiration of Plant Respiration” was tried out with good results, but the device was cumbersome and inconvenient to handle. Demonstration experiments that can only do 1-2 sessions at a time cannot be applied continuously. If there are many classes, they require multiple sets of device containers. This is inconvenient. Plant respiration analyzer is a good method for rapid detection of crops in modern agricultural production.

A wide-mouth bottle instead of a glass cover does this experiment and teaches the same results. The device is relatively simple, the method is: 3-4 days before class, the students of the organizational botany interest group take two equal volumes of wide mouth bottle (as a spinach) into the bottom of the bottle into 2-3 PCT deep water, Put a vigorously growing cabbage in each bottle or sow winter wheat in the bottle, stopper the stopper, and then apply Vaseline to avoid leakage. Place one jar in the dark for 2-3 days and the other in a bright place as a control.

In the classroom demonstration, first open the dark-processed wide-mouth bottle stopper and put the burning candle in it. Immediately extinguish (it also inspires the student to conclude that the bottle lacks Oa~Oa absorbed by the cabbage). Insert a funnel and a rubber stopper of a curved glass tube into the mouth of the bottle. Insert the other end of the curved glass tube into a test tube containing clarified lime water. Then pour clear water into the funnel and you can see it. The glass tubes inserted in the lime water continuously emit bubbles, and the clarified lime water soon becomes cloudy (inspire the students to come to the conclusion that the Mood plants breathe and suck in Oa and release C). Finally, use the same operation again. The method demonstrates that the wide-mouth bottle placed in a bright place is indestructible, and the clarified lime water does not become cloudy. At this time, students should be inspired to consider why the results of the demonstration of the jar in the light and in the dark are not the same. In order to understand the difference between respiration and photosynthesis. According to my experience, the experimental material is preferably cabbage, and other materials are often prone to failure. The plant respiration analyzer plays a very important role in the detection of plant respiration, which is also a result of long-term experimental application.

Scan WeChat for more:

Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Continuous Waste Tyre Pyrolysis Plant

Flowchat of Continuous Waste Tyre Pyrolysis Plant

Continuous Waste Tyre Pyrolysis Plant

Advantages of Continuous Waste Tyre Pyrolysis Plant

 1.  Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

                  2.  Auto-loading, auto-discharging and oil coming out at the same time;

                  3.  Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

                  4.  Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

                 5.  High efficiency condensers, more oil output, good quality oil, easy to clean.

                 6.  Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

                7.  National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

               8.  Easy to operate, need less manpower.

 

Technical Parameter of Continuous Waste Tyre Pyrolysis Plant

          

NO.

ITEM

Technical Parameter

1

Suitable Raw Materials

Small pieces of Waste tyre,rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully Automatic Feeding and Discharging under High Temperature at Same Time

5

Capacity(24h)

8-20Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

  Hot Air

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

Shipment

5*40HC

19

Delivery time

≤70Days

 

 

 

 

 

 

Continuous Waste Tyre Pyrolysis Plant

Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil

Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclingthewaste.com