Corrosion is mainly caused by the interaction of moisture, oxygen and corrosive substances in the air. Therefore, for vehicles that have been parked for a long time, the metal surface should be kept clean. Always keep ventilation in the garage of the parked vehicle to keep the relative humidity of the air below 70. It is necessary to remove dust, dirt and moisture from the car in time. The surface of the rust and the surface of the machine should be coated with oil, grease or wrapped with oil paper. The pores in each assembly should be sealed to prevent air, moisture and dust from entering the interior.

2, to prevent the deterioration of rubber products

Rubber products on automobiles, such as tires, transmission belts, and dust covers, often age, swell, or shape, resulting in poor performance and a shortened service life. Like rubber products aging, mainly because rubber is an unsaturated polymer hydrocarbon, easy to absorb oxygen in the air and oxidized, while vulcanized rubber also has a certain gas permeability, oxygen easily enters the interior to oxidize. Especially direct sunlight can promote the rapid aging of rubber. When the rubber product is contaminated by gasoline or engine oil, it will cause volume expansion, the rubber will become loose, and the elasticity will decrease. In order to prevent the aging of rubber products, direct sunlight and mineral oil contact should be avoided.

3, to prevent the mildew of cotton and linen products

Cushions and rugs are easy to absorb moisture. Especially in wet areas and rainy seasons, it is more susceptible to mildew. Therefore, the owner should check the cotton and linen products on the car frequently, and dry it at a proper time to keep it dry.

4, to prevent the anti-explosion performance of gasoline

The antiknock performance of gasoline is determined by the level of gasoline octane. When the car is stopped for a long time, the octane number of the gasoline will decrease with the loss of light components and the content of the gum, which will reduce the explosion resistance. Therefore, the gasoline tank should be tightly sealed and the temperature should be kept too high. It is best not to store the gasoline for too long.

5, often check the working condition of the engine

Start the engine at least once a month and idle for 4-5 minutes to check the engine operation. If there is an abnormal phenomenon, it needs to be adjusted and repaired in time. Also, check the battery frequently. The electrolyte liquid level of the battery must be 10-15mm higher than the electrode plate. When it is insufficient, the distilled water should be added in time. The battery should be kept fully charged and the battery should be charged if necessary.

158.75mm Solar Cell Solar Panel

These modules can be used for on-grid solar applications. Our meticulous design and production techniques ensure a high-yield, long-term performance for every module produced. Our rigorous quality control and in-house testing facilities guarantee Resun Solar`smodules meet the highest quality standards possible.

The solar panels are 12 years Product Warranty (Material and Workmanship) and 30 years Linear Power Warranty ( Transferable power output warranty :10 years/90% ; 25 years /80%).

With its products recognized by a number of international quality systems such as, TUV, IEC61215, IEC61730, CE, ROHS, FCC, CEC(Australia) and CGC(China)

Solar energy ,Solar panel ,Solar system ,Solar module ,Pv system

Resun Solar Energy Co., Ltd. , https://www.resunsolargroup.com